Publicidad
Idiomas disponibles
Idiomas disponibles
USING YOUR TOWER FAN (CONT.)
2. The tower fan automatically starts
oscillating and operates at fan speed 12.
3.
When the room temperature drops 3°C,
the fan speed will decrease to 6, then
the tower fan will automatically adjust fan
speed according to the room temperature.
Note: You can turn off oscillation by tapping
on the tower fan or pressing
Auto Mode
Use Auto Mode for automatic fan speed
adjustments according to the room temperature.
1.
Tap
and select Auto Mode.
show on the display.
2. The starting fan speed is determined by
the current room temperature.
Room
Temperature
≤ 21°C
22°C
23°C
24°C
25°C
26°C
27°C
28°C
29°C
30°C
31°C
> 31°C
Note: The max ambient working temperature
is 40°C.
on the remote.
will
Fan Speed
1
2
3
4
5
6
7
8
9
10
11
12
3. Optionally, tap
fan speed while in Auto Mode. The tower
fan will then operate according to the
following logic:
a. If the temperature increases 1°C,
the fan speed will increase one
level.
b. If the temperature decreases 1°C,
the fan speed will decrease one
level.
Advanced Sleep Mode
Advanced Sleep Mode is an optimised sleep
mode that takes into account the stages
before you sleep, during sleep, and as you
wake up.
1.
Tap
to turn Advanced Sleep Mode
on.
and
display.
a. After 5 seconds, the display will
turn off and selection sounds will
be disabled.
b. The starting fan speed is deter-
mined by your current fan speed
when you select Advanced Sleep
Mode.
2. After 1 hour, the fan speed will decrease
as the room temperature stabilises.
3. The tower fan then automatically adjusts
the fan speed according to the fluctuating
room temperature as you sleep and
wake up.
a. If the temperature increases 1°C,
the fan speed will increase one
level.
b. If the temperature decreases 1°C,
the fan speed will decrease one
level.
to manually adjust the
will show on the
EN
7
Publicidad
