Bosch WEU GBM 16-2 RE Professional Manual Original página 12

OBJ_BUCH-21-007.book Page 12 Tuesday, March 22, 2016 1:47 PM
12 | English
 When working with the machine, always hold it firmly
with both hands and provide for a secure stance. The
power tool is guided more secure with both hands.
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for drilling in wood, metal, ceramic
and plastic.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Key type drill chuck
2 Gear selector
3 Lock-on button for On/Off switch
4 On/Off switch
5 Chuck key
6 Rotational direction switch
7 Depth stop
8 Wing bolt for depth stop adjustment
9 Auxiliary handle (insulated gripping surface)
10 Handle (insulated gripping surface)
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
1 609 92A 2AL | (22.3.16)
Technical Data
Rotary drill
Article number
Rated power input
Output power
No-load speed
– 1st gear
– 2nd gear
Rotational speed under load, max.
– 1st gear
– 2nd gear
Rated torque (1st/2nd gear)
Spindle collar dia.
Maximum drilling diameter
(1st/2nd gear)
– Steel
– Wood
– Aluminium
Chuck clamping range
Tapered drill spindle
Weight according to EPTA-
Procedure 01:2014
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-1.
Typically the A-weighted noise levels of the product are:
Sound pressure level 83 dB(A); Sound power level 94 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
2
Drilling into metal: a =2.5 m/s , K=1 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
GBM 16-2 RE
0 601 120 5..
W 1050
W 570
-1
min 0 – 600
-1
min 0 – 1450
-1
min 0 – 400
-1
min 0 – 950
Nm 14/6
mm 43
mm 16/8
mm 40/20
mm 20/13
mm 1.5 – 16
B 16
kg 3.7
/II
2
.
Bosch Power Tools