10 TECHNICAL SPECIFICATIONS
10.1 TECHNICAL CHARACTERISTICS
Accuracy is calculated as ± [%rdg + (dgt*resolution)] referred to 23°C ± 5°C, <60%RH
AC TRMS CURRENT MEASUREMENT
Range
2 ÷ 2500A
Additional error due to not centering:
Crest Factor max:
Frequency (Hz):
Conversion mode:
Bandwidth:
Sampling frequency:
Memory size:
Sampling period:
Serial port:
Reference guidelines
Safety:
EMC:
Insulation:
Pollution level:
Max height of use:
Measurement category:
10.2 GENERAL CHARACTERISTICS
Mechanical characteristics
Dimensions (L x W x H):
Max diameter cable clamped:
Head length:
Weight (including battery):
Protection index:
Power supply
Battery type:
Battery life:
10.3 ENVIRONMENTAL CONDITIONS
Reference temperature:
Operating temperature:
Operating humidity:
Storage temperature:
Storage humidity:
This instrument complies with the requirements of Low Voltage Directive
2014/35/EU (LVD) and of EMC Directive 2014/30/EU
This instrument complies with the requirements of 2011/65/EU (RoHS) directive and
Resolution
1A
2% reading
3
50±6%, 60±6%
TRMS
3200Hz
64 samples each 20ms
1Mbyte
1s, 6s, 30s, 1min, 5min
RS232
IEC/EN61010-1
IEC/EN61326-1
double insulation
2
2000m (6562ft)
CAT III 1000V, CAT IV 600V AC to ground
120 x 80 x 43mm (5 x 3 x 2in)
174mm (7in)
600mm (24in)
about 0.5kg (10lv)
IP65 (RS232 connector closed)
2x1.5V AA LR06 alkaline batteries
> 6 months (with charged batteries)
23°C ± 5°C (73 ± 41°F)
-20°C ÷ 60°C (-4° ÷ 140°F)
100%RH (RS232 connector closed)
-20°C ÷ 60°C (-4° ÷ 140°F)
100%RH (RS232 connector closed)
2012/19/EU (WEEE) directive
EN - 13
XL421 - XL422
Accuracy
±(2%rdg +2 digit)