Shop-Vac BLB Serie Manual Del Usuario página 11

PROBLEM
Parts/accessories
missing
Vacuum cleaner
will not start
Dust discharging
from exhaust
Loss of suction
Static shock
WARNING
DETACHED OR BROKEN, ExPOSING THE MOTOR OR ANY OTHER ELECTRICAL COMPONENTS,
OPERATION SHOULD BE DISCONTINUED IMMEDIATELY TO AVOID PERSONAL INJURY OR
FURTHER DAMAGE TO THE VACUUM. REPAIRS SHOULD BE MADE BEFORE REUSING THE
VACUUM.
FOUR YEAR HOME USE WARRANTY
Your Shop-Vac vacuum cleaner is warranted for normal household use, in accordance with the User
®
Manual, against original defects in material and workmanship for a period of four years from date of
purchase. Should this product be used for commercial or rental use, a 90 day limited warranty will apply.
Shop-Vac Corporation warrants placing this vacuum cleaner in correct operating condition, by repair or parts
replacement, during the warranty period, without charge. This warranty does not cover accessories. Use of
non-recommended filters and/or accessories may void the manufacturer's warranty. Shop-Vac
no responsibility for damage or faulty performance caused by misuse, careless handling, and where repairs
or modifications have been made. Do not attempt to service your vacuum beyond that described in the
User Manual. Proof of purchase date is required. The warranty gives you specific legal rights, and you may
have other rights which vary from state to state or province to province. This warranty is void outside of the
United States and Canada.
Customers in the United States: for product service contact Shop-Vac Corporation, Customer Service, at
(570) 326-3557 or go to www.shopvac.com/support. Visit www.shopvac.com for your vacuum's parts
list schematic.
Customers in Canada: for product service return the complete unit, (transportation prepaid), to
the Authorized Shop-Vac
authorized service centres in your area.
Customers in Mexico: for product service see paperwork that came with your unit.
TROUBLESHOOTING
POSSIBLE CAUSES
1. Packed in tank
1. No power at receptacle
2. Defective switch
3. Defective motor
1. Filter not installed/not installed
properly
2. Filter damaged
3. Filter clogged or dust is too fine
4. Filter not functional
1. Loose hose connection
2. Filter clogged
3. Full tank
4. Hole in hose
1. Dry environment
2. Relative humidity of air is low
–
IF ANY OF THE MOTOR HOUSING PARTS SHOULD BECOME
Service Centre nearest you. Visit www.shopvac.ca for a complete list of
®
SOLUTION
1. Check in tank
1. Check for power
2. Contact Shop-Vac
customer service
3. Contact Shop-Vac
customer service
1. Properly install filter
2. Replace filter
3. Use more efficient filter
4. Clean or replace filter
1. Tighten hose connection
2. Clean or replace filter
3. Empty tank
4. Replace hose
1. Add moisture to air (if
practical, use a console
or installed humidifier).
2. This situation is temporary
and does not affect the use
of the vacuum cleaner.
®
®
assumes
®
PAGE 11