Domo DO1126FR Manual De Instrucciones página 39

4. Plug the power cord into a socket. A beep indicates that the device is in standby mode.
5. Remove the frying pan from the device. Place the ingredients in the frying pan with the grille. Do
not put too many ingredients in the appliance so that the ingredients do not touch the heating
elements. Pay attention to the MAX indication in the frying pan here.
6. Put the frying pan with the filled grille back in the device.
7. Press the on/off button to make the desired settings.
8. Press the temperature/timer setting to set the desired temperature and timer. "°C" will be seen
flashing on and off on the display, you can now set the desired temperature with the +/- buttons.
The temperature can be set from 80 to 220°C. Each press of the button will increase/decrease the
temperature by 5°C. You can also keep the button pressed to make the selection advance faster. You
can see which temperature is selected on the display.
9. When you have set the desired temperature, press the temperature/timer setting again. "MIN" will
now flash to let you know you can set the timer. The timer can be set from 1 to 60 minutes. Each
press of the button +/- will increase/decrease the time by 1 minute. You can also keep the button
pressed to make the selection advance faster. You can see which timer is selected on the display.
10. Press the start/pause button to start. Small light stripes will flash on and off one after the other on
the display. These remain visible on the display as long as the appliance is switched on. The set timer
and temperature appear alternately on the display.
NOTE: You can pause the appliance if you want to add/remove ingredients during use or if you want
to adjust the temperature or timer. Press the start/pause button. The icon will flash on and off on the
display to let you know the appliance is paused. If you want the appliance to continue cooking, press
this button again.
11. You can take the fryer basket out of the appliance in between to shake up the ingredients or to check
how fried your food is. The appliance stops working automatically and will continue working (if the
set time has not yet elapsed) when you slide the fryer basket back into the appliance.
The appliance is equipped with a function that acts as a reminder to shake the food, see chapter
"Shake food reminder".
12. At the end, a bell will ring to indicate that your food is ready. The unit then switches off
automatically. You can also turn the device off earlier by pressing the start/pause button and then
pressing the power button to turn the device off completely.
13. Remove the frying pan from the appliance and place it on a heat-resistant holder. You can put the
food in a bowl or take it out of the frying pan with heat-resistant tongs that do not scratch the non-
stick coating of the frying pan.
SHAKE FOOD REMINDER
The appliance is equipped with a function that reminds you to shake the food in the fryer during use to
obtain an even frying result. Halfway through the frying process, the "SHAKE" symbol will light up on the
display to remind you to shake or turn the food in the fryer. An audible signal will also sound. If you do
nothing, the symbol will remain lit.
NOTE: The appliance does not pause automatically, it will only pause if you briefly remove the fryer
basket from the appliance. It will continue working (if the timer is still running) once you slide the fryer
basket back into the appliance.
COMMENTS
· An acoustic signal is emitted for each setting you set on the device.
· You can monitor the progress of the cooking through the viewing window. Briefly press the on/off
button to turn the inside lighting on. The icon on the display will flash for a few seconds while the light
www.domo-elektro.be
39
DO1126FR