Chauvet DJ EVE TF-20X Guía De Referencia Rápida página 4

EN
Track Adapter
Before mounting this product, read the
1. Cut the power cable, leaving 1.5 feet for maneuverability.
2. Strip enough of the cable and wires to allow for splicing.
3. Dismantle the Track Adapter:
120 VAC
220 VAC
4. Pass the cable through each piece and the mounting bracket, as shown in the diagram below.
120 VAC
3
QUICK REFERENCE GUIDE
Safety Notes. To splice the included Track Adapter onto the EVE TF-20 X:
Remove
2 screws
assembly
Remove 2 screws
220 VAC
Washer
Pull
out
Remove cover
EVE TF-20 X QRG Rev. 2