MPM MCZ-64 Manual De Instrucciones página 15

5. The empty kettle will be automatically turned off by its overheating protection system. In such
case the kettle should be allowed to cool for 15 minutes before its refilling.
HOW TO USE THE KETTLE
1. Remove the kettle from its base before filling it with water (7).
2. Open the kettle's cover (2), pour water to a desired level (however, not less than 0,5 l and do not
exceed the level of 1,0 l).
3. Pushing the button close the cover (2) accurately.
4. Place the kettle on the base (7).
5. Switch the kettle by means of the switch (5). When the water comes to a boil the kettle will turn
off automatically.
IMPORTANT NOTE! The kettle may be used with its base delivered in the scope of purchased
model. Do not ever open the kettle lid in course of water boiling.
CLEANING AND MAINTENANCE
NOTE! The kettle should be regularly descaled in accordance with the instructions included be-
low. Always unplug cord of power base before cleaning and allow the jar to cool down.
1. Fill the jar with water mixed with vinegar or lemon juice (citric acid) or special descaling agent avail-
able in the shops selling the household equipment.
2. Let the mixture soak in the kettle for an hour and boil the water thereafter.
3. Empty the kettle and rinse the inside thoroughly with cold.
4. Repeat this action up to three times, if necessary.
5. In order to eliminate the smell of vinegar, boil and remove water several times.
6. Wipe the jar inside and outside with a cloth.
7. Failure to descale your kettle may result in its damage.
WARNING! Never immerse the device or the base in water or other liquids. This may result in
electric shock or fire.
CAUTION! Do not use any wire brush or other abrasive objects. Do not use any acidic or abrasive
detergents.
CAUTION! Periodically remove the filter (8) from the kettle, wash it in warm water with a deter-
gent, and rinse it clean completely. Remove persistent dirt with a soft brush. Once cleaned and
rinsed completely, reinstall the filter.
TECHNICAL DATA
The technical parameters are given on the data plate of the product.
Power cord lenght: 0,7 m
ATTENTION! MPM agd S.A. reserves its rights to modify the technical data.
Proper disposal of the product (waste electrical and electronic equipment)
Marking on the product indicates that after the service-life of the product expires, it should not be dis-
posed with other type of municipal waste. Used equipment may have a negative impact on the environ-
ment and health of people due to potentially containing hazardous substances, mixtures and components.
Mixing electric waste with other types of waste or disassembling those in an unprofessional manner may
cause a release of substances that are hazardous to the environment and health. Used equipment should
be handed-over to a point for collection of electric waste. In order to obtain detailed information regarding the
electric waste collection points, the user should contact the municipal point of electric waste collection or used
equipment processing department.
EN
15