Publicidad
Idiomas disponibles
Idiomas disponibles
Other Features
Cooking Complete
To remind you that you have food in the oven, the
COMPLETE and beep once a minute until you either
Repeat last
Use this time saving feature for cooking repetitive items
like cookies or appetizers. This feature will repeat the
last cooking cycle used, including time, temperature,
power levels, and turntable settings
NOTE: The last program used is stored for two hours.
Resume feature
1. If your food needs to cook a bit longer, you can
restart the oven by pressing the START/PAUSE pad
or selector dial.
will restart immediately at 10% of the original time.
Clock
The clock must be set before you can use your oven for
the first time. When setting the clock time for the first
time go directly to step two.
The clock is designed to turn off when unit is idle for
30 seconds to minimize the standby power usage. The
clock will turn on when unit is in use or door is opened.
There is not an override option available based on the
Auto Conversion
Auto conversion automatically reduces the convection
baking temperature. You still input the recipe
temperature and the oven control does the rest.
Beeper Volume
Use this feature to adjust the volume of the beeper. You
can even turn it off.
Temperature Units
To change temperature units, press the SETTINGS pad
and select TEMPERATURE UNITS. Turn the dial to
26
1. Press OPTIONS and select REPEAT LAST.
2. The last cooking cycle will be displayed.
3. Press the START/PAUSE pad or the selector dial to
start cooking.
The program stays in memory for 5 minutes. After that
you will need to begin the program again.
1. To change the clock time, press the SETTINGS pad
TIME.
2. Turn the dial to set hours. Press the dial to enter.
NOTE: Setting hours sets AM/PM.
3. Turn the dial to set minutes. Press the dial to enter.
To change the setting, press the SETTINGS pad
and turn the dial to AUTO CONVERSION. Press the
dial to enter. Turn the dial to change the setting to
dial to enter.
Press the SETTINGS pad, turn the dial to select
BEEPER VOLUME, press the dial to enter. Select the
beeper volume, press the dial to enter.
49-7000135 Rev. 0
Publicidad
