Descargar Imprimir esta página

Brinkmann 810-8533-S Manual Del Propietário página 27

Parrilla de gas de alta resistencia

Publicidad

Idiomas disponibles

Idiomas disponibles

Step 4
Lift the cart sides up into place on
each side of the cart. Cart sides will
secure into place with
pre-attached bolts on each cart leg.
Tighten bolts securely. Then insert
tank retention screw through the
hole in the bottom of the cart base.
Step 5
Remove the pre-attached bolt on
cart base. Loosen pre-attached bolt
on back brace and slide the keyhole
on the tank block bar over the bolt.
Then attach tank block bar onto cart
base using the removed bolt as
shown.
Step 6
Insert the door bracket into the slots
next to the two bolt holes near the
bottom of the front, left cart leg.
Align the two holes on the door
bracket with the two holes on the
bottom of the leg as shown below.
Attach with bolts. Repeat for all door
brackets.
Step 7
Insert the door hinge pin into the
hole on the bottom door bracket and
align door with bracket. Depress the
spring pin on the top of the door
and slide door toward upper door
bracket until spring pin locks into
door bracket hole. Repeat for other
door.
25
Bolts
Door Pin
Door
Bracket
Spring
Door Pin
Door
Bracket

Publicidad

loading