Publicidad
Idiomas disponibles
Idiomas disponibles
3.4 Collection tray
When the collection tray is full, the product will not work. You have to take out the collection tray,
empty it and put it back before the product will work again.
1
1.
Hold the collection tray with two hands. Gently pull out the collection tray as shown in image
2. Hold the collection tray by the handle and gently empty the collection tray as shown in
image 2.
3. Replace the collection tray. The product will automatically start working again.
3.5 Sound signal
When the collection tray is full of water, the product will stop working and emit an audible signal.
The audible signal will be audible for 20 seconds after you remove the collection tray from the
product.
A sound signal will be emitted each time a button is touched.
3.6 How to use
1.
Make sure the collection tray is empty and properly positioned.
2. Plug the power cord into the electrical outlet.
3. Touch the power button to turn on the product.
4. Select the desired mode by touching the mode button (repeatedly).
5. Touch the power button to turn off the product.
3.7 Timer setting
You can use the timer function in 2 different ways. When the time expires, the timer light
indicates the remaining time.
3.7.1 Automatic turning off
1.
Turn on the product by touching the power button.
2. Make sure that the timer function has not been set before. If 'Hr' is visible on the display, the
timer function has already been set.
3. Touch (repeatedly) the timer button to set the desired time. After the hours shown on the
display, the product will automatically switch off.
30
2
Publicidad
