Crosley Professional YFD45 Manual De Instrucciones página 13

REVERSING THE DOOR SWING (if desired)
REINSTALL HINGE ASSEMBLY
3
B. Hold the hinge in place and turn the door
over . Install the hinge using the 6 machine
screws removed earlier .
REINSTALL HINGE COVER
4
A. Turn the door over and place the hinge cover
in the opposite side of the door as shown . Align
the hinge cover holes with the holes in the door .
49-3000063
Optional Instructions
Hinge
Hinge cover
shown on
opposite
side
REINSTALL HINGE COVER (cont.)
4
B. Hold the hinge cover in place and turn the
door over . Install the hinge cover using the 2
machine screws removed earlier .
Hinge
Cover
MOVE STRIKE BRACKET
5
A. Using a putty knife or any other flat tool,
remove the 4 beauty buttons located on the
dryer where the door will be installed and
install them on the opposite side .
13