Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLING THE STACK BRACKET KIT
INSTALL DRYER AND
5
BRACKET ON WASHER
Disconnect power before installing .
WARNING
Failure to do so could result in
serious injury or death .
WARNING
Failure to do so may result in back or other injury,
or property damage .
• Use two or more people to install dryer .
• Avoid tipping and rupture of utility services .
• Dryer must be securely attached to the washer .
• DO NOT place the washer on top of the dryer .
• Mobile Home or Manufactured Home Installation
– Stacking of a gas dryer is not permitted in a
mobile home or manufactured home .
A. Lift the dryer on top of the washer . Be careful not
to scratch the top of the washer with the brackets .
Protect the washer control panel with cardboard
or other protection . Be sure to lift the dryer high
enough to clear the washer control panel .
B. Align the holes in the bracket with the holes in the
back of the washer . Using a Phillips screwdriver,
attach the 2 #8 x 1/2" tapping screws . Repeat on
both sides of the washer .
Attach brackets to
back of washer
49-3000063
Optional Instructions
- Excessive Weight
Hazard
FINALIZE THE INSTALLATION
6
Do not push on the dryer once
CAUTION
installed to top of the washer .
Pushing on the dryer may result in pinched fingers .
A. Refer to the washer Installation Instructions to
complete the washer installation .
B. Refer to the dryer Installation Instructions to
complete the dryer installation .
C. Carefully slide or walk the stacked washer and
dryer into place . Use felt pads or other sliding
device to assist moving and to protect flooring .
Dryer
Place
hands
here
Washer
Place
hands
here
17
Publicidad
