Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Starting & Stopping (See Fig. D)
WARNING! The tool runs for a few seconds
after it has been switched off.
Let the motor come to a complete standstill before
setting the tool down.
D
ON
Adjusting the blowing speed / air volume
with 3-speed switch (See Fig. E)
E
EN
III
8
OFF
1
I
USER TIPS
-
Hold the blower tube approximately 8" above the
ground when operating the tool.Use a sweeping
motion from side to side.
-
After blowing the debris/leaves into a pile, it is
easy to dispose of the pile.
Caution!
-
Do not blow hard objects such as nails, bolts,
or rocks.
-
Do not operate the blower near bystanders
or pets.
-
Use extra care when cleaning debris from
stairs or other tight areas.
-
Wear safety goggles or other suitable eye
protection, long pants, and shoes.
Turbo button for power boosting
F
NOTE:
• Turbo button for power boosting can increase air
flow significantly, and it can be used for clearing
2
heavy or wet debris.
• First switch on the blower and select a speed
control (speed 1, 2 or 3), then depress the turbo
button and hold it.
Release the Turbo button, the blower will return to
the previously selected speed.
3
FOR BATTERY TOOLS
The ambient temperature range for the use and stor-
age of tool and battery is 32 ℉~113 ℉(0 ℃~45 ℃).
The recommended ambient temperature range for
the charging system during charging is 32 ℉~104 ℉
(0 ℃~40 ℃).
CLEANING THE TOOL
Clean the tool regularly.
WARNING! Keep your product dry. Under
no circumstances spray with water.
-
To clean the tool, use only mild soap and a
damp cloth.
-
Do not use any type of detergent, cleaner or
solvent which may contain chemicals that
1
2
Publicidad
