Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS FOR USE
Charge indicator
Press the switch to check the battery level of Jump Starter.
Indicator
Unlit
Battery level
0%
The indicator will flash one by one during the period of charging.
Different numbers of lighting indicators show different battery level of Jump Starter.
All indicators light off when the charging is completed.
Recharge Instructions
Connect the 230V battery charger to the mains and then the connector to the recharge
port of the jump starter.
Starting The Vehicle
1. Ensure that the starter is charged to more than 75%.
2. Connect the RED clamp to the POSITIVE + battery terminal, the BLACK clamp to
the NEGATIVE - battery terminal or to the corresponding remote poles. In the event
of incorrect connection, the REVERSE indicator light will light up and an audible
alarm will sound.
3. The voltage selection between 12Volt and 24Volt will be made as described in
the following paragraph. Follow the instructions carefully and make sure that the
vehicle's operating voltage is correct.
4. Start the vehicle
5. When the vehicle is started, quickly disconnect the clamps from the battery
6. Recharge the starter as soon.
4 Flashing
1 Led
10%
25%
2 Led
3 Led
50%
75%
English
4 Led
100%
15
Publicidad
