Intec I-STARTER XL Manual Del Usuario página 17

WARNING: Any polarity or voltage errors in this procedure may result
in personal injury and property damage, risk of explosion due to
hydrogen generation, and serious damage to the vehicle's CPU.
Cooling The Starter
Between successive start attempts the jumpstarter should be allowed to rest for a few
minutes before trying again, to allow the batteries to dissipate the heat generated.
If more than 8 start attempts are made in less than 10 minutes, the 12V and 24V lights
will flash alternately, the red Error light will come on and the unit will be inoperable
for the next 10 minutes.
Charging Cell Phone or Tablet Instruction
1. Plug the switch cable to Quick Charge USB port.
2. Select appropriate connector and connect it to your mobile phones or tablet.
3. Press the switch button to charge.
For powering 12V electronic devices and for the memory
saver/backup
1. Connect the 12V electronic device or cable with backup/memory saver function to the
12V cigarette lighter socket on the starter
2. Press the power button to power the socket.
3W LED flash light
Press the switch 3 seconds to start the LED flash light. There are 4 modes of LED light
appear in order (normal, strobe, SOS, off) if you press slightly.
English
17