Hilti ST 2500 01 Manual De Instrucciones página 10

Main applications
Application
Fastening insulation material to trapezoidal
steel sheet
Fastening wood to metal
Steel grade: ST 37 up to 12 mm
Steel grade: ST 52 up to 8 mm
Sheet metal to sheet metal
Sheet metal to sheet metal
Sheet metal to steel profile
Sheet metal to steel profile
Sheet metal to wood
Fiber-cement board to steel profile
Fiber-cement board to wood
Sandwich panel to steel profile
Sandwich panel to wood
Items supplied
Power tool, ST­GT 17 depth gauge, operating instructions.
Technical data
For rated voltage, rated current, frequency and/or input power, refer to the country-specific
type identification plate.
If the tool is powered by a generator or transformer, the generator or transformer's power output must
be at least twice the rated input power shown on the rating plate of the tool. The operating voltage of
the transformer or generator must always be within +5 % and -15 % of the rated voltage of the tool.
Product generation
Rated power input
Weight
Speed (running under no load)
Max. torque
Chuck
Protection class
Preparations at the workplace
CAUTION
Risk of injury! Inadvertent starting of the product.
▶
Unplug the supply cord before making adjustments to the power tool or before changing
accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5
Screw type
Insulating screws with
drill point
Type S-ID, with type
S-IS point
Self-drilling wing
screws mit drill point
Type S-WW
S-MD
S-MD
S-MD 51 + S-MD 21
S-MD 53 + S-MD 23
S-MP 53
S-FD 03
S-FD 01
S-CD 63
S-CDW 61
ST 2500
01
600 W
1.5 kg
(3.3 lb)
0 /min ... 2,200 /min
19 Nm
1
/ " hex socket positive lock
4
II
378506
Diameter Product
in mm
•/• ST 2500
•/• ST 2500
4.2 ST 2500
4.8
5.5
5.5
6.5 ST 2500
6.3 ST 2500
6.5
5.5 ST 2500
6.5
*378506*