Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Before first use
•
Unpack all the parts.
•
Upon unpacking, check that everything is complete and that no transport-related damage
has occurred. If your goods are damaged or incomplete, please contact our after-sales
service.
•
Clean the unit and its components ( Cleaning and maintenance).
Use
Open the lid. Remove the ice basket.
Fill the water tank with drinking water.
Note: Do not fill above the MAX water level mark.
Reinsert the ice basket. Close the lid.
Connect the power plug to an appropriate mains socket.
Press
on the control panel.
The default size setting is
Press the
button to switch the size setting to small. The
The
indicator lights up when the ice basket is full. The unit will automatically stop
producing ice.
Note: Once the ice has been removed from the container, the unit will automatically restart
ice production after approx. 5 seconds.
To remove the ice: open the lid. Remove the ice basket.
Remove the ice cubes using the ice scoop.
Once you have obtained the desired amount of ice, press
Unplug the power plug from the mains socket.
To drain water from the unit: move the unit forwards until it hangs at least 10 cm off the
edge of the countertop.
. The
indicator will be lit.
16
EN
indicator will then turn on.
to stop ice production.
Publicidad
