Publicidad
Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
• The ice basket is full. The
The
indicator
is lit.
• The infrared light-emitting
• The ice cube tray is not in the
The
and
indicators
are lighting up
simultaneously.
The ice cubes are
• It is taking too long to make
stuck.
• The water in the water tank
Ice production
• The ambient temperature or
appears normal,
but no ice is
being produced.
Low ice
• Low heat dissipation.
production.
• The water temperature is too
• The ambient temperature is
Storage
• Always unplug the unit before storing it.
• Store the unit in a fresh, dry and dust-free place, out of the
reach of children and pets.
• Please retain the packaging and use it to store your unit when
it is not in use for an extended period of time.
infrared light is blocked by
ice.
diode and/or the infrared
light-receiving diode is/are
not working.
correct position.
ice.
is too cold.
the water temperature is too
high.
high.
too high.
20
• Remove the ice from the ice basket.
• Remove any foreign object from the
infrared light emitting and receiving
diodes. Restart the unit.
• Unplug the unit, then plug it back in.
Restart the unit.
• Stop ice production. Restart the unit
once the ice has melted.
• Fill the water tank with water at a
temperature between 8 and 25 °C.
• Start ice production in an environment
with an ambient temperature below
32 °C. Fill the water tank with fresh
water.
• To ensure good ventilation, leave a
gap of 20 cm on all sides of the unit.
• Fill the water tank with water at a
temperature between 8 and 25 °C.
• Use the unit in an environment with
an ambient temperature between 10
and 32 °C.
EN
Publicidad
