Publicidad
Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
Cleaning and maintenance
WARNING
• For hygiene reasons, the unit must be cleaned before
and after each use.
• Do not use organic solvents, boiling water, cleaners, or
strong acids or alkalis, etc., to clean the unit.
• Do not clean the evaporator.
WARNING
• Before cleaning or maintaining the unit, make sure that
it has been switched off and unplugged from the mains
socket. Then let it cool completely.
• Never immerse the unit in water or any other liquid.
• Clean the unit with a soft, slightly damp cloth. Make sure that
no moisture gets inside the unit while cleaning it.
• Never use corrosive cleaners, wire brushes, abrasive scouring
pads or metal/sharp tools to clean your unit.
• Thoroughly dry the unit after cleaning it.
• Store the unit in a cool, dry place, out of the reach of children
and pets.
Troubleshooting
Problem
Possible causes
• Low water level or no water.
The
indicator
• The water inlet on the lower
is lit.
part of the water tank is
blocked.
19
Solution
• Stop ice production. Fill with water.
Press
to restart ice production.
• Clean the water inlet.
EN
Publicidad
