Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
WARNING
• Before use, make sure that the water outlet at the
bottom has been securely closed.
• Make sure that the unit is level and on a stable table or
surface, to prevent it from malfunctioning.
• If the unit has been moved, let it stand for 30 minutes
before connecting it to the power supply. Liquids inside
the compressor must be left to settle before use.
• To ensure good ventilation, leave a gap of approximately
20 cm on all sides of the unit.
• Before using the unit for the first time after transportation
or an extended storage period, leave it to settle for 2
hours after levelling and positioning the unit in the right
place.
• The unit must be placed on a dry, level surface with
sufficient ventilation, away from any heat sources, such
as ovens or heaters.
• Do not fill the water tank with hot water. This may
damage the unit. Fill the water tank with water at room
temperature or lower.
• Do not use the unit in a very cold environment (less
than 5 °C).
18
EN
Publicidad
