Husqvarna 525LK Manual Del Usuario página 17

3. Move the product from side to side when you cut
grass. Use full speed.
Maintenance schedule
WARNING:
and servicing given in this operator's
Maintenance
Clean the external surface.
Make sure that the throttle trigger lockout and the throttle trigger operates cor-
rectly.
Do a check of the stop switch to make sure that it operates correctly.
Make sure that the cutting attachment does not rotate at idle speed.
Clean the air filter. Replace the air filter if it is necessary.
Examine the cutting attachment guard for damages and cracks. Replace the
guard if it is hit or damaged.
Examine the trimmer head for damages and cracks. Replace the trimmer head if
it is damaged.
Make sure that the screws and nuts are tight.
Examine the engine, the fuel tank and the fuel lines for leaks.
Clean the cooling system.
Examine the starter and the starter rope for damages.
Examine the vibration damping elements for damages and cracks.
Clean the external parts of the spark plug. Remove it and do a check of the elec-
trode gap. Adjust the electrode gap to the correct distance, refer to
data on page 21 or replace the spark plug. Make sure that the spark plug is
fitted with a suppressor.
Clean the external parts of the carburetor and the area around it.
1027 - 004 - 13.03.2024
Maintenance
Only do the maintenance
To sweep the grass
The airflow from the rotating trimmer line can be used to
remove cut grass from an area.
1. Hold the trimmer head and the trimmer line parallel
to the ground and above the ground.
2. Apply full throttle.
3. Move the trimmer head from side to side and sweep
the grass.
WARNING:
cover each time you assemble new trimmer
line to prevent unbalance and vibrations in
the handles. Also do a check of the other
parts of the trimmer head and clean it if
necessary.
manual. For maintenance or servicing that
is not given in this operator's manual, speak
to your servicing dealer.
Technical
Clean the trimmer head
Daily Weekly Monthly
X
X
X
X
X
X
X
X
X
X
X
X
X
X
17