Descargar Imprimir esta página

Husqvarna 525LK Manual Del Usuario página 21

Ocultar thumbs Ver también para 525LK:

Publicidad

Idiomas disponibles

Idiomas disponibles

Check
Starter pawls.
Fuel tank.
Spark plug.
The engine starts but stops again
Check
Fuel tank.
Air filter.
Transportation and storage
Store and transport the product and fuel so that
there is no risk that any leakage or fumes comes
in contact with sparks or open flames, for example,
from electrical machinery, electric motors, electrical
relays/switches or boilers.
When you store and transport fuel always use
approved containers intended for this purpose.
When you store the product for long periods the
fuel tank must be emptied. Contact your local petrol
station to find out where to dispose excess fuel.
Drain the tank into the appropriate containers and
in a well ventilated area.
Technical data
Engine
1027 - 004 - 13.03.2024
Possible cause
The starter pawls cannot move freely.
Incorrect fuel type.
The spark plug is dirty or wet.
The spark plug electrode gap is incorrect.
The spark plug is loose.
Possible cause
Incorrect fuel type.
The air filter is clogged.
Transportation and storage
Technical data
Procedure
Remove the starter cover and clean around
the starter pawls.
Let an approved service agent help you.
Drain the fuel tank and fill with correct fuel.
Make sure that the spark plug is dry and
clean.
Clean the spark plug. Make sure that the
electrode gap is correct. Make sure that the
spark plug has a supressor.
Refer to technical data for correct electrode
gap.
Tighten the spark plug.
Procedure
Empty the fuel tank and fill it with cor-
rect fuel.
Clean the air filter.
Ensure that the product is cleaned and that a
complete service is carried out before long-term
storage.
The transport guard must always be fitted to the
cutting attachment when the product is transported
or in storage.
Secure the product during transport.
In order to prevent unintentional start of the engine,
the spark plug cap must always be removed during
long-term storage if the product is not under close
supervision and when you perform all service
measures.
Allow the product to cool before you put in storage.
525LK
21

Publicidad

loading