Husqvarna 525LK Manual Del Usuario página 4

Use approved protective gloves.
Use heavy-duty slip-resistant boots.
The product can cause objects to eject,
which can cause injury.
Maximum speed of the output shaft.
Keep a minimum of 15 m distance to
persons and animals during operation of
the product.
Risk of blade thrust if the cutting
equipment touches an object that it does
not immediately cut. The product can cut
off body parts. Keep a minimum of 15 m
distance to persons and animals during
operation of the product.
Only use flexible cutting wire. Do not
use metal cutting equipment for grass
trimming.
Stop.
Idle adjustment screw.
High speed needle.
Low speed needle.
The arrows show the limit for the handle
position.
4
Air purge bulb.
Choke.
Fuel.
yyyywwxxxx
Note:
Other symbols/decals on the product refer to
certification requirements for some markets.
EPA III
The Emissions Compliance Period referred to on the
Emission Compliance label indicates the number of
operating hours for which the engine has been shown
to meet Federal emissions requirement. Maintenance,
replacement or repair of the emission control devices
and system may be performed by any nonroad engine
repair establishment or individual.
The rating plate shows the
serial number. yyyy is the
production year, ww is the
production week.
1027 - 004 - 13.03.2024