MRA Varioscreen Instrucciones De Montaje página 3

GB
Read this manual carefully and check the parts list for completeness before you begin. We recommend
Number
1 MRA screen
2 Brackets
4 Rubber nuts, M5
6 Oval head screws, black, M5 x 16
mm
6 Plastic washers, 12 x 5 mm
1 Covering strip
2 Brackets
2 Allen screws, black, M5 x 10 mm
2 Locking nuts, M5
4 Washers, 5.3 mm
How to mount the screen on your motorbike:
1. Stand your motorbike up on a level surface.
2. Dismantle the original screen (P1).
3. Turn the lower screws out on the side mounting point and use them to fasten
the bracket with the tighter angle. Insert the rubber nuts (P2).
4. Fasten the bracket with the wider angle onto the unused holes on the mounting
point using the M5 x 10 mm Allen screws, locking nuts and washers on both
sides. Do not tighten the screws up yet. You will need to keep the brackets
adjustable until you have mounted the screen. Insert the rubber nuts (P2).
5. Position the covering strip between the headlight and the front mounting point
(P3).
6. Position the fairing screen and fasten it to the original bracket at the front, and
on the brackets on the sides using the screws and washers.
7. Now fasten the screws on the upper bracket.
After installation, check that all of the screws are tight; tighten them up if necessary. Repeat this at
regular intervals. Clean the screen with water, neutral soap and a sponge. Do not use solvents, alcohol or
MRA-Klement GmbH Siemensstr. 6 D-79331 Teningen Tel.: +49 7663 93890 Email: info@mra.de
Thank you for buying a MRA Windshield.
that you have your screen fitted by an authorised workshop.
Article
spirits to clean the screen as they will damage it.
MO UN T IN G IN STR UC T ION S
Triumph Tiger 800 XC
Article No..
--- Allen keys, 3 and 4 mm
Torx T30 screwdriver
10671
Box or open spanner, 8 mm
10629
Socket spanner, 8 mm
10554
10635
10794
11183
10998
11000
10999
2
Required tools