Descargar Imprimir esta página

Andis ANG-1 Instrucciones De Uso Y Cuidado página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

4. Keep the cord away from heated or sharp surfaces.
5. Never drop or insert any object into any opening.
6. Do not use outdoors or operate where aerosol (spray) or other
flammable products are being used or where oxygen is being
administered.
7. Do not touch the collet or attachments after use. These may
be hot and cause burns to the skin.
8. To disconnect, turn unit OFF, then remove plug from outlet.
9. Clean the nail grinder's air vents with compressed air on a
regular basis. Material may accumulate inside the grinder
and cause electrical failure.
10. Always wear safety glasses when using nail grinder. Do not
wear loose jewelry or clothing when in use. Keep long hair
pulled back out of work area.
11. Do not allow animal to lick or touch the nail grinder during
use.
12. To prevent damage to the nail, do not hold the grinding
wheel or stone in one place on nail or apply excessive
pressure to the nail while grinding.
13. Make sure attachments are securely in place before use.
Before each use, check that the sanding drum is
sufficiently expanded to secure the sanding band
during use. If sanding band is loose during operation, it
may be ejected from grinder and cause injury.
14. Do not leave nail grinder unattended when plugged in.
15. WARNING: During use, do not place or leave appliance
where it may be (1) damaged by an animal or (2) exposed
to the weather.
SAVE THESE INSTRUCTIONS
THIS PRODUCT IS INTENDED FOR PROFESSIONAL USE
3

Publicidad

loading

Este manual también es adecuado para:

66820