Publicidad
Idiomas disponibles
Idiomas disponibles
5. Use a continuous side-to-side motion when grinding each nail; holding the tip in
one place too long can cause unevenness and over-grinding. Do not keep the
grinding wheel or stone against the nail for longer than three seconds at
a time.
6. IMPORTANT: Do not apply excessive force when grinding. Let the speed
of the grinder do the work. Do not apply pressure to the nail with the spinning
grinding wheel. Pressure causes the nail to get hot and will cause pain to the
animal.
7. Keep the nail grinder away from the nail when first starting, or the grinder may
"grab" the nail and cause loss of control or injury to the animal.
8. Use the finishing stone for final shaping and a smooth finish.
USER MAINTENANCE
The internal mechanism of your nail grinder has been permanently lubricated at
the factory. Other than the recommended maintenance described in this manual,
no other maintenance should be performed, except by Andis Company or an Andis
authorized service station. To contact Andis directly, please call our Customer
Support Team at 1-800-558-9441 or email us at support@andisco.com.
CLEANING & MAINTENANCE
- Brush or blow off dust or other material from nail grinder after each use.
- Use a soft cloth to wipe off nail grinder.
- Replace grinding attachments when worn.
- Check cords and nail grinder for damage periodically.
ACCESSORIES
In addition to the parts included with the grinder, other accessories are available for
order. Call our Customer Support Team at 1-800-558-9441 or visit andis.com
for more information.
CAUTION: Never handle your Andis nail grinder while you are operating a water
faucet, and never hold your nail grinder under a water faucet or in water. There is
danger of electrical shock and damage to the appliance. Andis Company will
not be responsible in case of injury due to this carelessness.
7
Publicidad
