Publicidad
Idiomas disponibles
Idiomas disponibles
1) Fill the Bath with Water
Fill the tub to your preference.
NOTE: Be careful not to overfill the bath as the water level will rise when the bather enters the bath.
2) Turn the Air Massage On
Press the ON/OFF button to begin the Air Massage.
The massage begins on an intensity level that is 60% of the maximum
intensity.
3) Change Massage Intensity
•
Press and hold the Up Blower button to increase the blower speed.
Release at the desired speed.
•
Press and hold the Down Blower button to decrease the blower speed.
Release at the desired speed.
4) Change Massage Modes
Press the Mode button to change between the massage modes. The
modes cycle in the following way:
Normal > Oscillate > Pulse > Normal
NO TE: The controller is designed to shut the blower off after 20 minutes
of continuous running. To restart the blower, press the On/Off button.
Massage Mode 1: Oscillating Massage Mode :
Oscillating mode gradually cycles through the
intensity settings giving a wave-like, soothing
massage.
To Activate: Press the LED button
•
Pressing the LED button and holding for one second will turn the
light off.
Changing the Chromotherapy Mode
• The first press will turn the light on the first mode, the second will
turn the light on the next mode, etc.
• Chromotherapy modes: White, Rainbow Cycle (Slow), Rainbow
Cycle (Fast), Turquoise, Blue, Magenta, Red, Orange, Yellow, Green,
Rainbow Cycle (Slow).
OPERATING INSTRUCTIONS
MASSAGE MODES
Massage Mode 2: Pulsating Massage Mode:
Pulsating mode cycles the jets from the minimum
intensity level to the maximum intensity level, giving a
powerful, penetrating massage.
Chromotherapy Light
4
Publicidad
