Urmet 2Voice AIKO 1716/1 Manual De Instrucciones página 13

INSTALLATION
Fix the fl ush mounting box at the height shown in the following fi gure.
Fasten the bracket to the embedding box.
Perform connections and dip-switch settings.
At the end of programming, fasten the video door phone to the bracket.
TERMINAL PINS DESCRIPTION
LINE IN Connection to the system BUS
LINE OUT Connection to the next device for an in/out connection
S+
Call repeat
S-
Call repeat
CP Floor call
CONFIGURATION OF APARTMENT STATIONS BRACKETS
Default values: all video door phones default confi guration is the following:
USER = 127
INTERNAL CODE = 0
Therefore, for the proper operation of the system, always pay attention to dip switches, in order to
confi gure them with the correct value.
§
For dip switch settings, see the system manual provided with the power supply Ref. 1083/20.
DS1716-001D
INT CODE
1
2
O N
=
O N
=
13