Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
TROUBLESHOOTING
W
ARNING:
TO REDUCE THE RISK OF INJURY
FROM MOVING PARTS AND/OR
ELECTRIC SHOCK, TURN POWER
SWITCH OFF AND DISCONNECT
GROUNDED PLUG FROM ELECTRICAL
OUTLET BEFORE PERFORMING
TROUBLESHOOTING CHECKS.
Minor problems often can be xed without
calling customer service.
PROBLEM
CAUSE
Unit will not
1. No power to unit.
run.
2. Switch not on.
Unit is not
1. Obstructions are
rotating.
keeping the fan
from working.
Unit runs but
1. Unit has been
the fan
severely jolted
makes loud
causing fan blade
scraping
to rub against
noise.
housing or
housing to deform.
Unit runs but
1. Dirt build up on
vibrates
fan blade.
excessively.
2. Severe jolt has
bent motor shaft.
W
ARNING:
If the supply cord is damaged, it
must be replaced by the manufacturer, its service
avoid a hazard.
TOOL GUARANTEE
5
YEAR
LIMITED
GUARANTEE
6
SOLUTION
1. Plug unit in.
2. Place in "ON"
position.
1. Check for
obstructions. If you
turn the fan off. Unplug
the fan and carefully
remove the obstruction.
Plug the fan in and turn
it on again by referring
to the operating
instructions.
1. Contact customer
service.
1. Contact customer
service.
order to
Publicidad
