TROUBLESHOOTING GUIDE
Problem
After connecting power
supply and pressing the
"ON/OFF" button, the
appliance does not go on.
Heating being interrupted
in normal use and a "Beep"
is heard.
No operation during the
heating being in use.
Checking
Is the electricity available?
Has the fuse blown?
Is the plug connected firmly?
Is the cookware unsuitable or
is there no cookware on the
cooktop?
Is the cookware not conside-
rably placed at the centre of
the heating zone?
Is the cookware being heated
but continually being remo-
ved?
Is the cookware empty or the
temperature too high?
Is the air intake clogged or
dirt has accumulated?
Is the cooker working over
2 hours without any external
instruction?
- 13 -
Solution
Use after restoring power supply.
Check the root causes carefully. If
the problem cannot be fixed, please
contact Service Centre for checking
and repairing.
Replace compatible cookware for
the induction cooktop.
Place the cookware at the centre of
the defined heating zone.
Place a cookware inside the heating
zone.
Please check whether the applian-
ce is being misused.
Remove the stuff clogging the air
intake/exhaust vent. Operate the
appliance again after cooling down.
Reset cooking modes or use timer
function.
EN