TFA Dostmann 60.2505 Instrucciones De Uso página 11

TFA_No. 60.2505 Anleitung_03_24
Radio-controlled clock
• The manually set time will be overwritten by the DCF time when the signal is received suc-
cessfully
• Press SET button to change between time and date (DATE appears on the display).
7.2 12 and 24 hours system indication
• Press DOWN button in normal mode to choose 12 HR or 24 HR system.
• In 12 HR system PM (after 12 o'clock) appears on the display.
7.3 Setting of alarm clock
• Press and hold ALARM button.
• flashes on the LCD of the display.
• The hour digit is flashing. Press UP or DOWN button to adjust the hours.
• Press ALARM button again and you can adjust the minutes with the UP or DOWN button.
• Confirm with ALARM button.
• The display shows the current time.
• Press ALARM button again and the alarm function is activated.
• appears on the display.
• Once the alarm starts to ring (3 different sounds), you can stop the alarm by pressing any
button.
• You can activate the snooze function by pressing the SNOOZE/BRIGHTNESS button on the
top.
• flashes and the alarm will be interrupted for 4 minutes.
• To turn off the alarm function, press again the ALARM button.
7.4 Backlight
• To activate the brightness of the backlight (2 levels), press SNOOZE/BRIGHTNESS button.
20
11.03.2024 11:30 Uhr Seite 11
Radio-controlled clock
8. Care and maintenance
• Clean it with a soft damp cloth. Do not use solvents or scouring agents. Protect from mois-
ture.
• Remove the batteries if the device will not be used for an extended period of time.
• Keep the instrument in a dry place.
9. Troubleshooting
Problems Solution
➜ Connect unit to main adapter
No indication
➜ Press WAVE button for 3 seconds
No DCF reception
➜ Manual time setting
➜ Wait for attempted reception during the night
➜ Reset the instrument
Incorrect indication
If your device fails to work despite these measures contact the supplier from whom you pur-
chased it.
10. Waste disposal
This product and its packaging have been manufactured using high-grade materials and com-
ponents which can be recycled and reused. This reduces waste and protects the environment.
Dispose of the packaging in an environmentally friendly manner using the collection systems
that have been set up.
Disposal of the electrical device
Remove non-permanently installed batteries and rechargeable batteries from the
device and dispose of them separately.
21