Buffalo 600 Serie Manual De Instrucciones página 6

EN
Operation
Function knob with on/off switch
Lower element with fan
Before first time use
There may be some odour with initial cooking due to insulation materials and heaters. This odour will
disappear after a short time. Therefore, before first time use, run the appliance at 250°C for 45 minutes.
Note: Before using for the first time, clean all parts well. Let dry completely.
Working with the oven
1. Set the function knob to the desired mode (Fan only / Upper element only / Upper element with fan /
Both elements with fan / Lower element with fan).
2. Select the desired oven temperature using the thermostat. The heating indicator will light up and the
oven will start to preheat.
3. Once the oven has reached the desired temperature, the heat indicator light will turn off. The food
can then be placed inside and cooked for the desired time period.
4. After the food has cooked, open the oven door and take the food out carefully.
5. After use, set the thermostat and function knob to '0' position to switch off the power. Please allow
the oven to cool before daily cleaning can be done.
WARNING: The food and oven pans are very hot! Take care when removing the pan from
the oven. Carefully open the door and remove cooked food wearing oven mittens.
6
CU470_ML_A5_v2_20240202.indb 6 CU470_ML_A5_v2_20240202.indb 6
Off position
Fan only
Upper element only
Upper element with fan
Both elements with fan
Heating indicator
Off position
Thermostat
Overheat indicator
2024/2/2 14:12 2024/2/2 14:12