Publicidad
Idiomas disponibles
Idiomas disponibles
Heating operation
(This function is only applicable for appliance with heating function, i.e. GHLAC12-RMK / BLAC12-RMK /
BLLAC 12-14SR).
•
Touch the
button till the
•
Touch the
or
button to select a desired room temperature. (16ºC- 31ºC).
•
Touch the
button to select wind speed.
Fan operation
•
Touch the Operation Mode Button
•
Touch the Fan Speed Adjustment Button
Note: Temperature can't be set manually in fan mode.
Timer operation
Timer ON setting:
•
When the air-conditioner is OFF, touch the Timer Button
Up Button
and Down Button
•
Preset ON Time is displayed on the operation panel.
•
ON time can be regulated at any time in 1-24 hours.
•
Touch the Timer button
•
To deactivate the timer function, touch Timer button
Timer OFF setting:
•
When the air-conditioner ON, touch Timer Button
Up Button
and Down Button
•
Preset OFF Time is displayed on the operation panel.
•
OFF time can be regulated at any time in 1-24 hours.
•
Touch the Timer button
•
At this time, the operation panel only displays the timing time value and countdown, and does not display
the temperature value.
•
To deactivate the timer function, touch Timer button
Sleep mode Operation:
•
Long press the Timer button
activate the sleep mode.
•
While in cooling mode, activate the sleep mode to set the temperature. It increases1°C after an hour and
at most increases 2°C after 2 hours.
•
Long press the Timer button
can cancel the setting.
Wi-Fi Operation:
•
Long press the Standby button for 5s, enter the Wi-Fi factory set up mode;
•
The unit is connected with Wi-Fi If the Wi-Fi indicator is on, otherwise is not connected. When the Wi-Fi
indicator flashing slowly, the unit is at the Wi-Fi set up mode, if flashing quickly, the unit is connected
with Wi-Fi;
•
You can realize all the air conditioner functions by the mobile phone APP with the Wi-Fi connected.
Water drainage:
Water Full Alarm
•
The inner water tray in the air-conditioner has one water level safety switches, it controls the water level.
•
When water level reaches an anticipated height, the water full indicator
full, please remove the rubber blockage from the drainage outlet at the bottom of unit, and drain all water
outside.
Continuous Drainage
•
You can use the continuous drainage with a drainage hose connected to the bottom drain hole, when the
unit working at the HEAT mode.
5059340831558_MNL_IN_V04.indd 85
5059340831558_MNL_IN_V04.indd 85
icon appears.
till the
icon light is on.
to select wind speed.
.
again to confirm, Timer indicator
.
again to confirm, Timer indicator
on panel for 5 seconds or press Sleep key
on panel for 5 seconds or press Sleep key
85
and select a desired ON time by touching
turns on.
until timer indicator
and select a desired OFF time by touching
turns on.
until timer indicator
lights up. When the water is
turns off.
turns off.
on remote control to
on remote control again
08-12-2023 12:11:38
08-12-2023 12:11:38
Publicidad
