Use the arrow touches to select the desired room temperature.
Use the "fan" touch to select the desired air speed.
2. DRY function
Press the "mode" touch unit the "dry" indication light turns on.
With the selection you can't select te temperature or fan speed.
Keep windows and doors closed for an optimal dehumidification.
3. AUTO function
When the airco is in the "auto" mode, the airco will automatically make a se-
lection between "cool" or "fan" function, depending on the room temperature
and the selected temperature.
The airco will automatically stabelise the room temperature on the selected
temperature.
When using the "auto" function, you can't select the fan speed.
4. FAN function
Press the "mode" touch until the fan indication light will turn on.
Press the "fan" touch to select the air speed.
The temperature can't be selected.
You don't need to attache the air outlet hose.
5. TIMER function
When the unit is on, you press the "timer" touch. The "timer off" indication
light will turn on. This indicates that the "auto shut off" is activated. When
pressing het "timer" touch again, the "timer on" indication light will turn on.
This indicates that the "auto on" function is activated.
Press the arrow buttons to select the time. The max time selection is 24 hours.
After finishing the selection, the time will start to countdown on the display
until "auto on" or "auto off", depending on the selection you made.
You can cancel the timer function at any time by pressing the "on/off" touch.
When the error code E1 or E2 is displayed, the timer selection will be can-
celed.
6. SLEEP function
When pressing the "sleep" touch, the selected temperature will be elevated
with 1 °C after 30 min. After another 30 min the temperature will increase
with another 1°C. The airco will maintain this temperature for 7 hours. Af-
ter this time, the airco will go back to the original set temperature and the
"sleep" function will end.
NOTE : this function can not be selected with the "fan" or "dry" function.
65
DO324A