Publicidad
Idiomas disponibles
Idiomas disponibles
DO324A
AUTOMATIC RESTART
When the airco will turn off unexpectely, because of a power failure, the unit will
turn back on when the power comes back on. All the settings will remain the same as
before the power failure.
NOTE : the unit can only restart after 3 min. So if the power failure is shorter than 3
min the unit will still take up to 3 min to restart.
INSTALLATION
Place the airco on a solid and stable floor, this way you will prevent excessive noice
and vibrations. Make sure that the floor is strong enough to support the weight of the
appliance.
The appliance has small wheels for easy moving. Make sure only to move the airco
over a flat and level surface. Be careful when moving the airco over carpet. Never roll
the unit over an object.
Place the unit near an earthed socket.
Never place any object within 30 cm round the airco.
INSTALLATION OF THE WINDOW KIT
The air outlet hose must be used in the "cool"
or "auto" mode. During the "fan" or "dry"
mode, you don't need to attache the air outlet
hose.
-
Place the connecting hose/window
adapter on the air exhaust hose.
-
Place the window adapter in your
window. This may be either horizon-
tally or vertically. Lock the window
adapter at the desired length.
-
Fasten the connecting hose to the
window adapter.
-
Use the window seal to close up any
gaps between the window and the
window kit.
NOTE : Make sure the air outlet hose isn't bend during use.
Make sure there is a free surrounding of at least 50 cm around the outlet.
INSTALLATION WALL KIT
The air outlet hose must be used in the "cool" or "auto" mode.
During the "fan" or "dry" mode, you don't need to attache the
air outlet hose.
-
Make an opening in the wall the size of the wall adapa-
tor.
66
Publicidad
