Publicidad
Idiomas disponibles
Idiomas disponibles
1. Air filter
DO324A
-
Clean the air filter at least ever 2 weeks. To make sure the airco can operate
in optimal conditions.
-
This appliance has 2 filters. Remove both filters by follow the arrows on the
back of the unit.
-
Clean the air filters in lukewarm water with a bit of detergent. Rinse the fil-
ters thoroughly and let them dry.
-
Make sure the filters are completely dry before placing the back in to the
airco.
NOTE : the grill and filter are attached to one another, but can be taken apart.
2. Airco body
Use a damp, soft cloth and a bit of mild detergent, to clean the outside of the
unit. Make sure the unit is thoroughly dried afterwards.
3. Storing
Before storing the unit for a longer periode of time, please follow the next
steps :
-
Drain all the water from the appliance.
-
Afterwards turn on the unit in the "fan" mode for half a day. Make sure the
unit is placed in a heated room. This will dry the unit completely and previent
the forming of mold.
-
Turn off the unit, remove the plug from the socket and remove the batteries
from the remote control.
-
Clean the filters and place them back in the unit.
-
Store the unit in a dry, dark place.
POSSIBLE PROBLEMS AND THEIR SOLUTIONS
-
The appliance isn't working when pressing the on/off touch.
o
The error code P1 is dispayed , drain the water from the airco.
o
The room temperature is lower than the selected temperature. Adjust
the selected temperature.
-
The room is not cool enough.
o
The windows and doors aren't closed. Make sure all windows and
doors are closed.
o
There are heat sources in the room. Remove all heat sources if pos-
sible.
o
The air outlet hose is not connected or blocked. Attache the hose and
check if there is no blockage.
o
The selected temperature is to high. Adjust the selected temperature.
-
The appliance is making to much noise or is causing vibrations.
o
The floor is nog level or flat. Place the appliance on the flat and level
surface if possible.
68
Publicidad
