Publicidad
Idiomas disponibles
Idiomas disponibles
Control settings.
Soil Level
3
Changing the SOIL LEVEL increases or decreases the wash time to remove different amounts of soil.
To change the SOIL LEVEL, press the SOIL LEVEL button until you have reached the desired setting. You can choose
between Extra Light, Light, Normal, Heavy or Extra Heavy soil.
Spin Speed
4
Changing the SPIN SPEED changes the final spin speed of the cycles. Always follow the garment manufacturer's care
label when changing the SPIN SPEED.
To change the SPIN SPEED, press the SPIN SPEED button until you have reached the desired setting. You can choose
between No Spin, Low, Medium, High or Extra High Spin. Higher spin speeds are not available on certain cycles, such as
Delicates.
Higher spin speeds remove more water from the clothes and will help reduce dry time, but may also increase the
possibility of setting wrinkles on some fabrics.
Wash Temp
5
Adjust to select the proper water temperature for the wash cycle. The prewash and rinse water is always cold to help
reduce energy usage and reduce setting of stains and wrinkles.
Follow the fabric manufacturer's care label when selecting the wash temperature.
To change the wash temperature, press the WASH TEMP button until you have reached the desired setting. You can
choose between Tap Cold, Cold, Warm, Hot or Sanitize. The Sanitized wash temperature is not available on certain cycles,
such as Delicates.
When selecting the Sanitize wash temperature, the washer increases the water temperature to sanitize and kill more
than 99% of many common bacteria found in home laundry. The sanitize wash temperature is only available on the
Whites/Heavy Duty wash cycle. For best results, select the heavy soil setting when using the Sanitize wash temperature
setting.
NOTE: The first 10 seconds of the wash fill is always cold. This feature assists in conditioning the fabric and preventing stains
from setting on garments.
START/PAUSE
6
Press to start a wash cycle. If the washer is running, pressing it once will pause the washer and unlock the door.
Press again to restart the wash cycle.
NOTE: If the washer is paused and the cycle is not restarted within 15 minutes, the current wash cycle will be cancelled.
NOTE: In some cycles the washer will drain first, then unlock the door when it is paused.
NOTE: The washer performs automatic system checks after pressing the START button. Water will flow in 45 seconds or
less. You may hear the door lock and unlock before water flows; this is normal.
7
6
Settings
Use the SETTINGS button to adjust
the following features:
Dryer Link:
Press the SETTINGS button.
When "DRYER LINK" appears in
the display, press ENTER. Using
the
/
arrow keys, select ON
and press ENTER.
When the washer cycle is
completed, the washer will
communicate with the dryer when
any button on the control panel is
touched or the door is opened.
The washer will display,
"TRANSFERRING CYCLE
INFORMATION TO THE DRYER"
and the dryer will display,
"RECEIVING CYCLE INFORMATION
TO THE DRYER".
The dryer will only communicate
with the washer if the dryer is not
running a cycle.
If the washer starts a new cycle
before the dryer has a chance
to communicate with it,
the information will be lost.
End-of-Cycle Volume:
Press the SETTINGS button. When
"VOLUME" appears in the display,
press ENTER, then select "End of
Cycle". Using the
/
arrow keys,
select High, Medium, Low or Off.
Control Sounds:
Press the SETTINGS button, then
select "Volume". When "CONTROL
SOUNDS" appears in the display,
press ENTER. Using the
/
keys, select High, Medium, Low
or Off.
Display Brightness:
Press the SETTINGS button. When
"DISPLAY BRIGHTNESS" appears
in the display, press ENTER. Using
the
/
arrow keys, select High,
Medium or Low.
Water Hardness
(Only appears when SMART
DISPENSER Pedestal Accessory
is connected to washer):
This will adjust the amount of
detergent dispensed automatically
for the SMART DISPENSER. See the
Owner's Manual supplied with the
SMART DISPENSER for instructions
for use.
arrow
Publicidad
