Proline VCBLMULTIC2 Manual De Usuario página 70

7. Attach the dust tank back to the appliance.
• Make sure the opening on the dust tank is aligned with the
air inlet of the appliance.
Cleaning the air inlet filter
Remove the dust tank and then remove the filter from the air inlet.
Clean the filter under running water. Dry it thoroughly before
replacing it.
Cleaning HEPA filter
The high efficiency particulate air (HEPA) filter is an effective
system in removing almost all indoor pollutants, dust mites, pollen
and mould spores.
1. Remove the air outlet filter grille and then remove the HEPA
filter.
2. Wash them under running water and allow them to dry
thoroughly.
DO NOT USE DETERGENTS TO CLEAN THE FILTER.
3. After cleaning, attach the HEPA filter back and then attach the
air outlet grille to the appliance until a click is heard.
68
VCBLMULTIC2 IB final 2023.indd 68 VCBLMULTIC2 IB final 2023.indd 68 18/7/2023 11:14 AM 18/7/2023 11:14 AM