Buffalo 600 Serie Manual De Instrucciones página 6

EN
Note: Before first time use, clean all parts well and dry completely. Ensure to place the hob
on a solid level surface and set all thermostats to the Off positions.
1. Place the pot with food on the hob.
Caution: Never place empty containers on the hot plates after the appliance is on.
2. Turn the thermostat clockwise/anticlockwise to set the required power setting.
3. After cooking is completed, remove the pot from the appliance.
4. Turn the thermostat to "0" position after use. Then disconnect the appliance from the power supply.
5. Clean the appliance after it has cooled down.
Tips for use
• If you operate the hotplates without pots and pans, you will damage the product.
• Place the pots so that they are centred on the hotplates. When you want to put the pot on another
cooking zone, lift it instead of sliding them to the desired cooking zone.
• Do not use unstable and easily tipped utensils on the hob. Do not place pot or pan lids on hot plates.
• Do not place aluminium and plastic containers on the appliance as it may be hot.
• Thaw frozen food before cooking. Splashes can damage the hob surface and cause a fire.
• Never fill the pan more than one-third full of oil. Do not leave it unattended while heating the oil.
Extremely hot oil is a fire hazard. If oil catches fire, cover it with a fire blanket or wet cloth. Turn off
the stove if it's safe to do so.
• Do not let any objects fall onto the hob. Even small objects can damage the hob. If the surface is
damaged in any way, for example visible cracks, switch the product off immediately to reduce the risk
of electric shock.
WARNING: The pot and pans are very hot! Take care when removing from the hot plate. If
necessary, wear heat protective gloves.
Cleaning, Care & Maintenance
The appliance should be cleaned after each day's operation; however it may require
cleaning more often, depending on the volume carried out.
Failure to clean the appliance regularly may cause frequent malfunctions.
Do not use any abrasive cleaning agents on the appliance.
1. Switch off the hob and disconnect from the power supply.
2. Remove all pots/pans and allow the appliance to cool before cleaning.
3. The control unit cannot be immersed in water, but can be wiped down with a damp cloth.
4. Use a suitable detergent to clean the main body.
5. The main body can also be cleaned with warm soapy water. Let it dry well, ensuring no moisture
enters the inside of the appliance.
6. Use a dry cloth to clean the appliance to ensure there is no water on the heating element and control
panel.
Technical Specifications
Note: Due to our continuing program of research and development, the specifications herein may be
subject to change without notice.
6
CU471_CU472_ML_A5_v2_20240202.indb 6 CU471_CU472_ML_A5_v2_20240202.indb 6 2024/2/2 11:16 2024/2/2 11:16