Descargar Imprimir esta página

Buffalo 600 Serie Manual De Instrucciones página 7

Fogones eléctricos
Ocultar thumbs Ver también para 600 Serie:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
Model
Voltage
CU471
380V 3N~,
50-60Hz
CU472
230V 1N~,
CU472-E
50-60Hz
Model
Plug type
CU471/CU472
CU472-E
CEE 7/7
Troubleshooting
A qualified technician must carry out repairs if required.
Fault
The unit is not
working
Appliance does
not reach set
temperature, or slow
to heat up
Hot plate overheats
or starts to smoke
Compliance
The WEEE logo on this product or its documentation indicates that the product must not
be disposed of as household waste. To help prevent possible harm to human health and/or
the environment, the product must be disposed of in an approved and environmentally safe
recycling process. For further information on how to dispose of this product correctly, contact
the product supplier, or the local authority responsible for waste disposal in your area.
Buffalo parts have undergone strict product testing in order to comply with
regulatory standards and specifications set by international, independent,
and federal authorities.
Buffalo products have been approved to carry the following symbol:
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic,
mechanical, photocopying, recording or otherwise, without the prior written permission of Buffalo.
Every effort is made to ensure all details are correct at the time of going to press, however, Buffalo reserves the right to
CU471_CU472_ML_A5_v2_20240202.indb 7
CU471_CU472_ML_A5_v2_20240202.indb 7
Power
Temperature
(Max.)
Range
7kW
90ºC - 450ºC
3.5kW
90ºC - 450ºC
N.A.
Probable Cause
The unit is not switched
on
Plug or lead is damaged
Mains power supply fault
Faulty thermostat
Faulty heating element
Build-up of fat on cooking
surface
Heater limiter damaged
change specifications without notice.
Dimensions
Cooking plate
h x w x d (mm)
4 x Ø 180mm
600 x 600 x 240
2 x Ø 180mm
400 x 600 x 240
Solution
Check the residual current
relay and the overcurrent
fuse in the power supply
line and switch on
Replace Plug or lead
Check mains power supply
Consult a qualified technician
Consult a qualified technician
Clean the appliance
Switch Off. If the hot plate fails to work after cooling
down, consult a qualified technician
EN
Net
Weight
11.5 kg
8.4 kg
Check the unit is
plugged in correctly
and switched on (For
CU472-E only)
7
2024/2/2 11:16
2024/2/2 11:16

Publicidad

loading

Este manual también es adecuado para:

Cu471Cu472