Metra 99-7356B Instrucciones De Instalación página 2

1. Unsnap and remove the small trim
below the climate controls, then remove
(1) Phillips screw from the radio trim
panel. (Figure A)
2. Using the panel removal tool, carefully
unclip and remove the radio trim panel.
(Figure B)
3. Remove the panel clips from the radio
trim panel and save them for the kit
assembly.
4. Unscrew the factory hazard button and
save it for the kit assembly.
5. Remove (4) Phillips screws securing the
factory radio, disconnect the wiring, and
then remove the radio.
Continue to Kit Assembly
2
DASH DISASSEMBLY
(Figure A) (Figure B)
386.257.1187
|
MetraOnline.com