Metra 99-7356B Instrucciones De Instalación página 3

ISO DIN radio provision
1. Attach the factory panel clips to the
r adio housing. (Figure A)
2. Attach the factory hazard button to the
r adio trim panel with (2) #8 x 3/8"
P hillips screws provided with this kit.
( Figure A)
3. Attach the pocket to the radio brackets
w ith (4) #8 x 3/8" Philips screws
p rovided with this kit. (Figure B)
4. Slide the radio into the radio brackets/
p ocket assembly and secure with the
s crews supplied with the aftermarket
r adio. (Figure C)
5. Locate the factory wiring harness in the
dash. Metra recommends using the proper
mating adapter from Metra or AXXESS.
6. Reconnect the negative battery terminal
and test the unit for proper operation.
7. Snap the radio trim panel over the new
radio and reassemble dash in reverse
order of disassembly.
KIT ASSEMBLY
(Figure A)
(Figure B) (Figure C)
REV. 5/3/22 INST99-7356B
3