Craftsman 82174 Manual Del Propietário página 8

Diode Test
Continuity Check
Battery Test current
Input Impedance
ACV Bandwidth
DCA voltage drop
Display
Overrange indication
Polarity
Measurement Rate
Low Battery Indication
Battery
Fuses
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Operating Altitude
Weight
Size
Safety
Test current of 1 mA maximum, open circuit
voltage 2.8V DC typical
Audible signal will sound if the resistance is
less than approximately 30£2
9V (6mA); 1.5V (100mA)
>IM_
45Hz to 450Hz
200mV
3 ½ digit, 2000 count LCD, 0.5" digits
"1" is displayed
Automatic (no indication for positive polarity);
Minus (-) sign for negative polarity.
2 times per second, nominal
"BAT" is displayed if battery voltage drops
below operating voltage
one 9 volt (NEDA 1604) battery
mA, pA ranges; 0.2A/250V fast blow
A range; 10A/250V fast blow
41°F to 104°F (5°C to 40°C)
-4°F to 140°F (-20°C to 60°C)
Max 80% up to 87°F (31°C) decreasing linearly
to 50% at 104°F (40°C)
<80%
7000ft. (2000) meters maximum.
9.17 oz. (260g).
4.78" x 2.38" x 1.57" (121.5mm x 60.6mm x
40mm)
For indoor use and in accordance with
Overvoltage Category II, Pollution Degree 2.
Category II includes local level, appliance,
portable equipment, etc., with transient
overvoltages less than Overvoltage Category Ill.