Craftsman CMXEOCG471 Manual Del Propietário página 36

TO ERASE THE MEMORY
ERASE ALL REMOTE CONTROLS AND KEYLESS ENTRIES
1. Press and hold the LEARN button on garage door opener until the learn
LED goes out (approximately 6 seconds). All remote control and keyless
entry codes are now erased. Reprogram any accessory you wish to use.
ERASE ALL DEVICES (INCLUDING myQ
1. Press and hold the LEARN button on garage door opener until the learn
LED goes out (approximately 6 seconds).
2. Immediately press and hold the LEARN button again until the learn LED
goes out. All codes are now erased. Reprogram any accessory you wish
to use.
®
ENABLED ACCESSORIES)
ERASE THE CONNECTION FROM GARAGE DOOR OPENER TO HOME
WI-FI NETWORK
1. Press and hold the black adjustment button on the garage door opener
until 3 beeps are heard (Approximately 6 seconds).
36