Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly
No tools are required for assembly; simply insert
foot into body of unit until you hear a click.
Charging
Before charging make sure unit is in the OFF
position.
1. Insert the charging adapter plug into the
charging port on the back of the unit or the
bottom of the charging base (if applicable). The
unit can also be charged from the hand vacuum
by inserting the charging adapter plug into the
charging port on the back of the unit.
2. Plug the adapter into the wall outlet. If using
the charging base (optional), place unit onto
base. The power LED lights will illuminate when
charging. Charge the unit completely for 8 hours
prior to first use.
NOTE: The adapter may become warm during
charging – this is normal.
3. When the unit is fully discharged,
approximately 8 hours of charging is required
for the battery to regain full capacity.
Charging
Battery Status
LED Color
Full
Green
Low
Red
Operations
Control buttons
The power button is located on the top
of the handle. Settings include:
a. Power Icon = On/Off
b. Brush Icon = Brush On/Off
c. Suction Icon = Normal/High
(For 1315 Series only)
Using your cordless vacuum
1. Push power button ON.
2. Push brush button on to easily clean
hard floors, low pile carpet, and area rugs.
3. Use suction button to control power
of suction.
Charging
Green
Slow Blinking Red
WARNING
Do not plug in your vacuum cleaner until
you are familiar with all instructions and
operating procedures.
1.
a.
b.
c.
1313
Series
www.BISSELL.com
1315
Series
5
Publicidad
