Descargar Imprimir esta página

Bissell BOLT 1313 Serie Guia Del Usuario página 6

Aspiradora inalambrica 2 en 1

Publicidad

Idiomas disponibles

Idiomas disponibles

Operations
2-way folding handle
This feature is great for cleaning under couches,
beds and other hard to reach areas.
1. To release, pull trigger located on the back of
the handle to bend handle forward for cleaning
under furniture.
2. For space saving storage, pull trigger to bend
handle backward.
Cleaning with the removable hand vacuum
1. Remove hand vacuum by pulling the hand
vacuum directly out of the unit.
2. The power button is located on top of the grip
area. Push ON to start cleaning.
3. Easily clean messes on furniture, stairs,
and other hard to reach areas.
4. To use hand vacuum accessories, insert the
end of the tool into the end of the hand vacuum
prior to turning hand vacuum ON.
5. When done cleaning, turn power OFF and
remove hand vacuum accessory and place
back in unit.
Maintenance & Care
To maintain maximum cleaning performance, the
following maintenance steps must be performed:
Emptying the dirt cup
Dirt cup should be emptied before debris
reaches the FULL line on cup.
1. Turn power OFF and remove hand vacuum
from unit by pulling the hand vacuum directly
out of the unit.
2. Hold hand vacuum vertically and depress the
release button to release dirt cup.
3. Grasp filter tabs and pull vertically to remove
filter cup and empty dirt into waste container.
4. Replace filter back into the dirt cup and
attach dirt cup to hand vacuum until it snaps
securely in place.
www.BISSELL.com
6
1.
2-Way
Folding
Handle
Release
1.
Tip
» Accessories can be
combined together or
used individually.
WARNING
To reduce the risk of electric shock, turn power switch off
and disconnect polarized plug from electrical outlet before
performing maintenance or troubleshooting checks.
Release Button
2.
WARNING
Do not operate cleaner with damp or wet filters
or without vacuum bags and all filters in place.
2.
2.
Power Switch
4.
3.

Publicidad

loading

Este manual también es adecuado para:

Bolt 1315 serie