Publicidad
Idiomas disponibles
Idiomas disponibles
Tank Brace
Carriage Bolt
Bolts
Cooking Grate
Brackets
Wing Nut
Hood
Step 10
Unscrew the pre-attached bolts
from the tank retention bracket.
Attach tank retention bracket in
between right front and rear cart
legs using the two pre-attached
M6 X 20 mm bolts as illustrated.
Attach the tank brace by inserting
the carriage bolt through the
keyhole, slide down and then use
the wing nut to secure.
Step 11
Attach cooking grate brackets
using four M6 X 12 mm bolts and
M6 washers as illustrated.
Step 12
Place the hood on the firebox.
Be sure the hood hinge and the
firebox hinge align (as shown
below).
Hood
Hinge
Firebox
Hinge
26
Publicidad
