Descargar Imprimir esta página

Black and Decker BDWD10 Manual De Instrucciones página 17

Aspirador de polvo y agua

Publicidad

Idiomas disponibles

Idiomas disponibles

2. The device has dirt full and block indication function,
the light turns on that means the air route way is blocked.
In this case, user should switch off the device and check:
a.
Is the hose or accessories blocked by large dirt?
b. Is the filter blocked by dirt?
User should take actions:
a.
Clean the dirt in the hose or other accessories.
b. Change or clean the dust bag (the HEPA filter).
BLOWING FUNCTION
The device has blow function, if necessary, fix the hose
connector to the exhaust of the device (the same method
with inlet connection), then fix the accessories to use (Fig. M).
CARE AND MAINTENANCE
Warning! Before storing the vacuum, the dust drum and
filter should be emptied and cleaned.
f The cord should be wrapped around the device (Fig. N),
the accessories should be stored in the storage base
(Fig. O). The vacuum should be stored indoors.
f To clean the device casing switch off and disconnect the
plug from the mains socket.
f Never expose the vacuum cleaner to the effects of the
weather (rain, etc.). No parts may be washed in
a dish washer.
f The casing, dust collecting chamber and filter chambers
of the vacuum cleaner can be wiped with a damp cloth
if required. No liquid must enter the vacuum cleaner in
the process. Never use strong cleaning substance
(scouring liquids, thinners), since these will corrode the
plastic surface. Only place the plug back in the
mains socket when you have made sure that all the parts
are thoroughly dry.
f Hair and fluff may gather on the running wheels and on
the floor nozzle of the vacuum cleaner in time. You
should remove these to ensure that handling of the
vacuum cleaner is always easy.
f Lubricating or oiling of the roller bearing is not
recommended, because this will cause dirt and
fluff to stick even better.
Correct disposal of this product
This marking indicates that this product should not be
disposed with other household wastes throughout the EU. To
prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems
or contact the retailer where the product was purchased. They
can take this product for environmental safe recycling.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste. Should you
find one day that your BLACK+DECKER product
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the retailer
when you purchase a new product.
SERVICE INFORMATION
BLACK+DECKER offers a full network of company-owned and
authorized service locations. All BLACK+DECKER Service
Centers are staffed with trained personnel to provide customers
with efficient and reliable power tool service. For more
information about our authorized service centers and if you need
technical advice, repair, or genuine factory replacement parts,
contact the BLACK+DECKER location nearest you, or visit us at
www.BlackandDecker-la.com
SPECIFICATIONS
VACUUM
TYPE
AR
Input
V
220
Voltage
Frequency
Hz
Power
W
ENGLISH • 17
BDWD10
B2C
B3
B2
220
120
220
50
50
60
60
1200
BR
127
60

Publicidad

loading