Be Cool BCIWM60CM Manual Del Usuario página 104

•
Insert the axle (11) through the holes in the support bracket (12).
•
Insert the bolts (10-2, 10-3, 10-4, 10-5) into the four innermost holes
of the axle to secure it.
•
Slide a wheel (9) onto each end of the axle (11) and push it up to the
bolt.
•
Insert the bolts (10-1, 10-6) into the remaining holes at both ends of
the axle (11) to secure the wheels.
•
To adjust the angle and direction, tilt the fan by gently pushing or
pulling on the top of the fan housing.
•
DO NOT apply excessive pressure as this may damage the fan.
•
You can loosen the butterfly nut (13) slightly before making your
adjustments or tighten it again after making your adjustments.
ASSEMBLY
TIPS
104