Publicidad
Idiomas disponibles
Idiomas disponibles
•
Make sure that the voltage used matches the specified voltage.
•
Turn the speed control on the tube to the selected speeds: 0 (off) and
speeds 1 and 2 for slow and high speeds.
•
The direction of the air flow is adjusted vertically by tilting the fan
head.
•
Never touch the blades with your hand or any other object!
•
Do not pull the cable too tight. If it is damaged after prolonged use,
have it repaired by an electrician.
To clean: Disconnect the mains cable from the socket. Carefully remove the
protective grille and the blades. Do not drop the blades! First use a soft cloth
with light soap to remove oil stains. Then wipe with a dry cloth and polish.
Never use polish or any corrosive liquids that could damage the paint, metal
or plastic! Insert the blades and lock the guard securely before use.
There will be no exchange if the above instructions are not followed. Always
test the product before purchasing.
1.
Caution! Before cleaning, allow the appliance to come to a complete
standstill and disconnect it from the power source.
2.
Use a soft cloth for cleaning. If dirt or soiling cannot be easily removed,
use warm soapy water.
3.
Do not use solvents or abrasive cleaners (thinners), metal cutlery or hard
brushes for cleaning, as these can damage the housing.
4.
Do not immerse the wind machine in water or other liquids. No water may
drip onto or into the motor housing of the wind machine.
5.
Dry all components thoroughly before storing them.
OPERATION
CLEANING INSTRUCTIONS
105
Publicidad
